PRODUCTS
precision manufacturing, innovation-driven
DX53D/ SGCD2/SGCD3 Galvanized Sheet
The material of DX53D galvanized sheet is a cold-rolled steel sheet with a hot-dip zinc coating. The substrate is a low-carbon steel with excellent deep-drawing and forming properties, while the zinc coating provides corrosion resistance through sacrificial protection. It is produced through a continuous hot-dip galvanizing process, where the cleaned steel strip is immersed in molten zinc and then cooled to form a metallurgically bonded zinc‑iron alloy layer. The product is widely used in automotive panels, home appliance housings, and other deep‑drawn or severely formed parts that require both high formability and good corrosion resistance.
Keywords:
DX53D/ SGCD2/SGCD3 Galvanized Sheet
Category:
Galvanized Steel Sheet
DX53D/ SGCD2/SGCD3 Galvanized Sheet Description
The material of DX53D galvanized sheet is a cold-rolled steel sheet with a hot-dip zinc coating. The substrate is a low-carbon steel with excellent deep-drawing and forming properties, while the zinc coating provides corrosion resistance through sacrificial protection.
It is produced through a continuous hot-dip galvanizing process, where the cleaned steel strip is immersed in molten zinc and then cooled to form a metallurgically bonded zinc‑iron alloy layer.
The product is widely used in automotive panels, home appliance housings, and other deep‑drawn or severely formed parts that require both high formability and good corrosion resistance.
Scope of Application
Galvanizing products are widely used in industry, agriculture, animal husbandry and fishery, energy, transportation, chemical industry, light industry, home appliances, construction, communications, national defense and other fields.
Product Parameters
| Product Name | DX53D/ SGCD2/SGCD3 Galvanized Sheet |
| Thickness | 0.12mm-6.00mm |
| Width | 20mm-1500mm |
| Length | 1m-12m, Support Customization |
| Standard | AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc. |
| Zinc Layer | Hot Galvanizing: 15-275g/m² |
| Pre-galvanized: 15-275g/m² |
Chemical Composition
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
Mechanical Properties
|
Grade |
Yield Strength MPa≥ |
Tensile Strength MPa≥ |
Elongation A%≥ |
|
DX51D Z/ZM/AZ/AM |
240-380 |
270-500 |
22 |
|
DX52D Z/ZM/AZ/AM |
140-300 |
270-420 |
26 |
|
DX53D Z/ZM/AZ/AM |
140-260 |
270-380 |
30 |
|
DX54D Z/ZM/AZ/AM |
120-220 |
260-350 |
36 |
|
S220GD Z/ZM/AM |
220 |
300 |
20 |
|
S250GD Z/ZM/AZ/AM |
250 |
330 |
19 |
|
S280GD Z/ZM/AM |
280 |
360 |
18 |
|
S300GD A/AM |
300 |
380 |
18 |
|
S320GD Z/ZM/AM |
320 |
390 |
17 |
|
S350GD Z/ZM/AZ/AM |
350 |
420 |
16 |
|
S450GD A/AM |
450 |
480 |
15 |
|
S550GD Z/ZM/AZ/AM |
550 |
550 |
- |
Galvanized Surface Selection
|
Zero Spangle |
Minimized Spangle |
Normal Spangle |
Large Spangle |
|
|
|
|
|
|
Use of The Environment |
Recommended Zinc Thickness |
|
Indoor Use |
Z10 or Z12 (100g/㎡or 120g/㎡) |
|
Suburbs |
Z20 and Painting (200g/㎡) |
|
Urban or Industrial Area |
Z27 (270g/㎡) or G90 (US Standard) and painted |
|
Coastal Area |
Thicker than Z27 (270g/㎡) or G90 (US Standard) and painted |
|
Punch or Deep Drawing Application |
Thicker than Z27 (270grams/㎡) or G90 (US Standard) avoid coating peeling after stamping |
|
Surface Treatment Type |
Code |
Features |
|
Chromic Acid Treatment |
C |
Good corrosion resistance, suitable for bare state |
|
Chromic Acid Treatment+Oiling |
S |
Good corrosion resistance |
|
Phosphoric Acid Treatment (Including Sealing Treatment) |
P |
Have a certain corrosion resistance, good paint performance |
|
Phosphoric Acid Treatment (Including Sealing Treatment)+Oiling |
Q |
Has a certain corrosion resistance, good paint performance, prevent rust during transportation and storage |
|
Phosphoric Acid Treatment (Excluding Sealing Treatment) |
T |
Have a certain corrosion resistance, good paint performance |
|
Phosphoric Acid Treatment (Excluding Sealing Treatment)+Oiling |
V |
Has a certain corrosion resistance, good paint performance, and prevent rust |
|
Oiling |
O |
Prevent rust during transportation and storage |
|
No Treatment |
M |
Suitable for immediate painting |
Material Comparison
|
Chinese Standard |
Japan Standard |
European Standard |
|
DX51D Z/DC51D Z (CR) |
SGCC |
DX51D Z |
|
DX52D Z/DC52D Z |
SGCD1 |
DX52D With |
|
DX53D Z/DC53D Z/DX54D Z/DC54D Z |
SGCD2/SGCD3 |
DX53D Z/DX54D Z |
|
S220/250/280/320/350/550GD Z |
SGC340/400/440/490/570 |
S220/250/280/320/350GD Z |
|
DX51D Z/DD51D Z (HR) |
SGHC |
DX51D Z |
Packing and delivery
We have been deeply involved in the fields of infrastructure construction and underground engineering for a long time. Our core products are grouting pipe series and advanced small conduits. We are an indispensable supplier of key materials in tunnels, subways, mines, water conservancy and various construction projects.
Packaging and shipping
FAQ
Q: How long is your delivery time?
A: Generally, if it is in stock, it will take 5-10 days, if it is not in stock, it will take 30 days.
Q: Can we send samples?
A: We can provide samples for the products you are interested in.
Q: How do we ensure quality?
A: We conduct pre-production sample testing, accept third-party or customer inspection, and conduct final inspection before shipment.
Q: How do you ensure long-term relationships?
A: We maintain high quality and competitive prices to benefit our customers. Every client is treated as a friend, we do business with sincerity and strive to build lasting relationships, regardless of origin.
Contact Us
Contact Us
Service Phone
Address
Liaocheng, Shandong, China
Need Assistance? We're Here To Help!
To request a quotation or locate your local distributor, please fill out the form below.lf you cannot find the product you need.
feel free to contact us and we will respond to you as soon as possible.
Other Products
The company's main product is the hydraulic rotary actuator, which has the advantages of small external dimensions, large drive torque, and precise control of rotation angle
Can't find the product you need?
Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry
JIECHUANG METAL
Shandong Jiechuang Metal Products Co., Ltd. is a technology-driven enterprise specializing in the production and sales of metal products.
LEARN MOREContact us:
E-mail:metalfactory@jiechuangsteel.com
WhatsApp: +86-18864878811
Tel:+86-18864878811
Copyright ©