PRODUCTS
precision manufacturing, innovation-driven
DX52D/SGCD1 Galvanized Coil
DX52D (according to European standard EN 10346) and its equivalent SGCD1 (according to Japanese standard JIS G 3302) are grades of hot-dip galvanized steel coil specifically designed for demanding cold forming applications.
Keywords:
DX52D/SGCD1 Galvanized Coil
Category:
Galvanized Steel Coil
DX52D/SGCD1 Galvanized Coil Description
DX52D (according to European standard EN 10346) and its equivalent SGCD1 (according to Japanese standard JIS G 3302) are grades of hot-dip galvanized steel coil specifically designed for demanding cold forming applications.
Compared to DX51D, the DX52D grade features improved mechanical properties, including lower yield strength and higher elongation, which provide superior formability. This makes it suitable for parts that require more complex bending, deep drawing, or stretching without cracking.
The product consists of a high-formability, low-carbon steel substrate protected by a durable zinc coating applied through the hot-dip process.
Scope of Application
Automotive Components: Non-structural body panels, brackets, seat frames, and reinforcement parts that require good formability.
Appliances: Complex-shaped panels for washing machines, dishwashers, and refrigerator liners.
Building Products: Formed roofing profiles, window frames, and door components.
Electrical Enclosures & Cabinets: Parts that require precise bending and assembly.
Scope of Application
Galvanizing products are widely used in industry, agriculture, animal husbandry and fishery, energy, transportation, chemical industry, light industry, home appliances, construction, communications, national defense and other fields.
Product Parameters
| Product Name | DX52D/SGCD1 Galvanized Coil |
| Thickness | 0.12mm-3.5mm |
| Width | 20mm-1500mm |
| Length | 508mm/610mm, Support Customization |
| Standard | AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, etc. |
| Zinc Layer | Hot Galvanizing: 15-275g/m² |
| Pre-galvanized: 15-275g/m² |
Chemical Composition
|
Standard |
Grade |
C |
Si |
Mn |
P |
S |
Ti |
|
Forcold Forming Chinese Standard |
DX51D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
DX52D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX53D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX54D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX56D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
DX57D+Z |
0.12 |
0.50 |
0.60 |
0.100 |
0.045 |
0.30 |
|
|
Forcold Forming Japanese Standard |
SGCC |
0.15 |
0.50 |
0.80 |
0.050 |
0.030 |
0.025 |
|
SGCD1 |
0.12 |
0.50 |
0.60 |
0.040 |
0.030 |
0.025 |
|
|
SGCD3 |
0.08 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
SGCD4 |
0.06 |
0.50 |
0.45 |
0.030 |
0.030 |
0.025 |
|
|
For Structure Japanese Standard |
SGC340 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.025 |
|
SGC400 |
0.25 |
0.50 |
1.70 |
0.200 |
0.035 |
0.150 |
|
|
SGC490 |
0.30 |
0.50 |
2.00 |
0.200 |
0.035 |
0.025 |
|
|
SGC510 |
0.30 |
0.50 |
2.50 |
0.200 |
0.035 |
0.025 |
|
|
For Structure AISI Standard |
S220GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
S250GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S280GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S320GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.025 |
|
|
S350GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
|
|
S550GD+Z |
0.20 |
0.60 |
0.70 |
0.100 |
0.045 |
0.150 |
Mechanical Properties
|
Grade |
Yield Strength MPa≥ |
Tensile Strength MPa≥ |
Elongation A%≥ |
|
DX51D Z/ZM/AZ/AM |
240-380 |
270-500 |
22 |
|
DX52D Z/ZM/AZ/AM |
140-300 |
270-420 |
26 |
|
DX53D Z/ZM/AZ/AM |
140-260 |
270-380 |
30 |
|
DX54D Z/ZM/AZ/AM |
120-220 |
260-350 |
36 |
|
S220GD Z/ZM/AM |
220 |
300 |
20 |
|
S250GD Z/ZM/AZ/AM |
250 |
330 |
19 |
|
S280GD Z/ZM/AM |
280 |
360 |
18 |
|
S300GD A/AM |
300 |
380 |
18 |
|
S320GD Z/ZM/AM |
320 |
390 |
17 |
|
S350GD Z/ZM/AZ/AM |
350 |
420 |
16 |
|
S450GD A/AM |
450 |
480 |
15 |
|
S550GD Z/ZM/AZ/AM |
550 |
550 |
- |
Galvanized Surface Selection
|
Zero Spangle |
Minimized Spangle |
Normal Spangle |
Large Spangle |
|
|
|
|
|
|
Use of The Environment |
Recommended Zinc Thickness |
|
Indoor Use |
Z10 or Z12 (100g/㎡or 120g/㎡) |
|
Suburbs |
Z20 and Painting (200g/㎡) |
|
Urban or Industrial Area |
Z27 (270g/㎡) or G90 (US Standard) and painted |
|
Coastal Area |
Thicker than Z27 (270g/㎡) or G90 (US Standard) and painted |
|
Punch or Deep Drawing Application |
Thicker than Z27 (270grams/㎡) or G90 (US Standard) avoid coating peeling after stamping |
|
Surface Treatment Type |
Code |
Features |
|
Chromic Acid Treatment |
C |
Good corrosion resistance, suitable for bare state |
|
Chromic Acid Treatment+Oiling |
S |
Good corrosion resistance |
|
Phosphoric Acid Treatment (Including Sealing Treatment) |
P |
Have a certain corrosion resistance, good paint performance |
|
Phosphoric Acid Treatment (Including Sealing Treatment)+Oiling |
Q |
Has a certain corrosion resistance, good paint performance, prevent rust during transportation and storage |
|
Phosphoric Acid Treatment (Excluding Sealing Treatment) |
T |
Have a certain corrosion resistance, good paint performance |
|
Phosphoric Acid Treatment (Excluding Sealing Treatment)+Oiling |
V |
Has a certain corrosion resistance, good paint performance, and prevent rust |
|
Oiling |
O |
Prevent rust during transportation and storage |
|
No Treatment |
M |
Suitable for immediate painting |
Material Comparison
|
Chinese Standard |
Japan Standard |
European Standard |
|
DX51D Z/DC51D Z (CR) |
SGCC |
DX51D Z |
|
DX52D Z/DC52D Z |
SGCD1 |
DX52D With |
|
DX53D Z/DC53D Z/DX54D Z/DC54D Z |
SGCD2/SGCD3 |
DX53D Z/DX54D Z |
|
S220/250/280/320/350/550GD Z |
SGC340/400/440/490/570 |
S220/250/280/320/350GD Z |
|
DX51D Z/DD51D Z (HR) |
SGHC |
DX51D Z |
Packing and delivery
We have been deeply involved in the fields of infrastructure construction and underground engineering for a long time. Our core products are grouting pipe series and advanced small conduits. We are an indispensable supplier of key materials in tunnels, subways, mines, water conservancy and various construction projects.
Packaging and shipping
FAQ
Q: How long is your delivery time?
A: Generally, if it is in stock, it will take 5-10 days, if it is not in stock, it will take 30 days.
Q: Can we send samples?
A: We can provide samples for the products you are interested in.
Q: How do we ensure quality?
A: We conduct pre-production sample testing, accept third-party or customer inspection, and conduct final inspection before shipment.
Q: How do you ensure long-term relationships?
A: We maintain high quality and competitive prices to benefit our customers. Every client is treated as a friend, we do business with sincerity and strive to build lasting relationships, regardless of origin.
Contact Us
Contact Us
Service Phone
Address
Liaocheng, Shandong, China
Need Assistance? We're Here To Help!
To request a quotation or locate your local distributor, please fill out the form below.lf you cannot find the product you need.
feel free to contact us and we will respond to you as soon as possible.
Other Products
The company's main product is the hydraulic rotary actuator, which has the advantages of small external dimensions, large drive torque, and precise control of rotation angle
Can't find the product you need?
Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry
JIECHUANG METAL
Shandong Jiechuang Metal Products Co., Ltd. is a technology-driven enterprise specializing in the production and sales of metal products.
LEARN MOREContact us:
E-mail:metalfactory@jiechuangsteel.com
WhatsApp: +86-18864878811
Tel:+86-18864878811
Copyright ©